edac-util is a program that reports EDAC(Error Detection and Correction), it reads information from EDAC in the kernel, using files exported by these drivers in sysfs. With no options, edac-util will report any uncorrected  error  (UE)  or  corrected  error (CE) information recorded by EDAC, along with any DIMM label information registered with EDAC.

Package info:

It's available in most of Linux distributions, it's called

edac-utils.x86_64
or for 32 bit machine
edac-utils.i686

Quiet mode, -q

It's also edac-util default option, it will reports only there is/are errors.

# edac-util   
mc1: csrow6: ch0: 7 Corrected Errors

Same when use -q option
# edac-util -q
mc1: csrow6: ch0: 7 Corrected Errors

Verbose mode, -v

# edac-util -v
mc0: 0 Uncorrected Errors with no DIMM info
mc0: 0 Corrected Errors with no DIMM info
mc0: csrow0: 0 Uncorrected Errors
mc0: csrow0: ch0: 0 Corrected Errors
mc0: csrow0: ch1: 0 Corrected Errors
mc0: csrow1: 0 Uncorrected Errors
...
mc0: csrow7: ch1: 0 Corrected Errors
mc1: 0 Uncorrected Errors with no DIMM info
mc1: 0 Corrected Errors with no DIMM info
mc1: csrow0: 0 Uncorrected Errors
mc1: csrow0: ch0: 0 Corrected Errors
mc1: csrow0: ch1: 0 Corrected Errors
mc1: csrow1: 0 Uncorrected Errors
...
mc1: csrow6: 0 Uncorrected Errors
mc1: csrow6: ch0: 7 Corrected Errors
mc1: csrow6: ch1: 0 Corrected Errors
mc1: csrow7: 0 Uncorrected Errors
mc1: csrow7: ch0: 0 Corrected Errors
mc1: csrow7: ch1: 0 Corrected Errors

Check EDAC driver status, -s

# edac-util -s
edac-util: EDAC drivers are loaded. 2 MCs detected
# edac-util -s -v # verbose output
edac-util: EDAC drivers are loaded. 2 MCs detected:
  mc0:F10h
  mc1:F10h

Chose report type, -r

The syntax is 
   -r, --report=report,...
     Specify the report to generate. Currently, the available reports are default, simple, full, ue,  and ce. These reports are detailed in the EDAC REPORTS section below. More than one report may be specified in a comma-separated list.

Default

# edac-util -r,default
mc1: csrow6: ch0: 7 Corrected Errors

Simple

# edac-util -r,simple 
mc0: Correctable errors:   0
mc0: Uncorrectable errors: 0
mc1: Correctable errors:   7
mc1: Uncorrectable errors: 0
Total CE: 7
Total UE: 0

full

The full option output is same as '-v' option, too long to show

ue, -- Uncorrected Error

# edac-util -r,ue  
UE: 0

ce, -- Correct Error

# edac-util -r,ce
CE: 7